Open Source Repository

Home /spring/spring-orm-3.0.5 | Repository Home



org/springframework/orm/hibernate3/support/OpenSessionInViewFilter.java
/*
 * Copyright 2002-2009 the original author or authors.
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *      http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

package org.springframework.orm.hibernate3.support;

import java.io.IOException;
import javax.servlet.FilterChain;
import javax.servlet.ServletException;
import javax.servlet.http.HttpServletRequest;
import javax.servlet.http.HttpServletResponse;

import org.hibernate.FlushMode;
import org.hibernate.Session;
import org.hibernate.SessionFactory;

import org.springframework.dao.DataAccessResourceFailureException;
import org.springframework.orm.hibernate3.SessionFactoryUtils;
import org.springframework.orm.hibernate3.SessionHolder;
import org.springframework.transaction.support.TransactionSynchronizationManager;
import org.springframework.web.context.WebApplicationContext;
import org.springframework.web.context.support.WebApplicationContextUtils;
import org.springframework.web.filter.OncePerRequestFilter;

/**
 * Servlet 2.3 Filter that binds a Hibernate Session to the thread for the entire
 * processing of the request. Intended for the "Open Session in View" pattern,
 * i.e. to allow for lazy loading in web views despite the original transactions
 * already being completed.
 *
 <p>This filter makes Hibernate Sessions available via the current thread, which
 * will be autodetected by transaction managers. It is suitable for service layer
 * transactions via {@link org.springframework.orm.hibernate3.HibernateTransactionManager}
 * or {@link org.springframework.transaction.jta.JtaTransactionManager} as well
 * as for non-transactional execution (if configured appropriately).
 *
 <p><b>NOTE</b>: This filter will by default <i>not</i> flush the Hibernate Session,
 * with the flush mode set to <code>FlushMode.NEVER</code>. It assumes to be used
 * in combination with service layer transactions that care for the flushing: The
 * active transaction manager will temporarily change the flush mode to
 <code>FlushMode.AUTO</code> during a read-write transaction, with the flush
 * mode reset to <code>FlushMode.NEVER</code> at the end of each transaction.
 * If you intend to use this filter without transactions, consider changing
 * the default flush mode (through the "flushMode" property).
 *
 <p><b>WARNING:</b> Applying this filter to existing logic can cause issues that
 * have not appeared before, through the use of a single Hibernate Session for the
 * processing of an entire request. In particular, the reassociation of persistent
 * objects with a Hibernate Session has to occur at the very beginning of request
 * processing, to avoid clashes with already loaded instances of the same objects.
 *
 <p>Alternatively, turn this filter into deferred close mode, by specifying
 * "singleSession"="false": It will not use a single session per request then,
 * but rather let each data access operation or transaction use its own session
 * (like without Open Session in View). Each of those sessions will be registered
 * for deferred close, though, actually processed at request completion.
 *
 <p>A single session per request allows for most efficient first-level caching,
 * but can cause side effects, for example on <code>saveOrUpdate</code> or when
 * continuing after a rolled-back transaction. The deferred close strategy is as safe
 * as no Open Session in View in that respect, while still allowing for lazy loading
 * in views (but not providing a first-level cache for the entire request).
 *
 <p>Looks up the SessionFactory in Spring's root web application context.
 * Supports a "sessionFactoryBeanName" filter init-param in <code>web.xml</code>;
 * the default bean name is "sessionFactory". Looks up the SessionFactory on each
 * request, to avoid initialization order issues (when using ContextLoaderServlet,
 * the root application context will get initialized <i>after</i> this filter).
 *
 @author Juergen Hoeller
 @since 1.2
 @see #setSingleSession
 @see #setFlushMode
 @see #lookupSessionFactory
 @see OpenSessionInViewInterceptor
 @see org.springframework.orm.hibernate3.HibernateInterceptor
 @see org.springframework.orm.hibernate3.HibernateTransactionManager
 @see org.springframework.orm.hibernate3.SessionFactoryUtils#getSession
 @see org.springframework.transaction.support.TransactionSynchronizationManager
 */
public class OpenSessionInViewFilter extends OncePerRequestFilter {

  public static final String DEFAULT_SESSION_FACTORY_BEAN_NAME = "sessionFactory";


  private String sessionFactoryBeanName = DEFAULT_SESSION_FACTORY_BEAN_NAME;

  private boolean singleSession = true;

  private FlushMode flushMode = FlushMode.MANUAL;


  /**
   * Set the bean name of the SessionFactory to fetch from Spring's
   * root application context. Default is "sessionFactory".
   @see #DEFAULT_SESSION_FACTORY_BEAN_NAME
   */
  public void setSessionFactoryBeanName(String sessionFactoryBeanName) {
    this.sessionFactoryBeanName = sessionFactoryBeanName;
  }

  /**
   * Return the bean name of the SessionFactory to fetch from Spring's
   * root application context.
   */
  protected String getSessionFactoryBeanName() {
    return this.sessionFactoryBeanName;
  }

  /**
   * Set whether to use a single session for each request. Default is "true".
   <p>If set to "false", each data access operation or transaction will use
   * its own session (like without Open Session in View). Each of those
   * sessions will be registered for deferred close, though, actually
   * processed at request completion.
   @see SessionFactoryUtils#initDeferredClose
   @see SessionFactoryUtils#processDeferredClose
   */
  public void setSingleSession(boolean singleSession) {
    this.singleSession = singleSession;
  }

  /**
   * Return whether to use a single session for each request.
   */
  protected boolean isSingleSession() {
    return this.singleSession;
  }

  /**
   * Specify the Hibernate FlushMode to apply to this filter's
   {@link org.hibernate.Session}. Only applied in single session mode.
   <p>Can be populated with the corresponding constant name in XML bean
   * definitions: e.g. "AUTO".
   <p>The default is "MANUAL". Specify "AUTO" if you intend to use
   * this filter without service layer transactions.
   @see org.hibernate.Session#setFlushMode
   @see org.hibernate.FlushMode#MANUAL
   @see org.hibernate.FlushMode#AUTO
   */
  public void setFlushMode(FlushMode flushMode) {
    this.flushMode = flushMode;
  }

  /**
   * Return the Hibernate FlushMode that this filter applies to its
   {@link org.hibernate.Session} (in single session mode).
   */
  protected FlushMode getFlushMode() {
    return this.flushMode;
  }


  @Override
  protected void doFilterInternal(
      HttpServletRequest request, HttpServletResponse response, FilterChain filterChain)
      throws ServletException, IOException {

    SessionFactory sessionFactory = lookupSessionFactory(request);
    boolean participate = false;

    if (isSingleSession()) {
      // single session mode
      if (TransactionSynchronizationManager.hasResource(sessionFactory)) {
        // Do not modify the Session: just set the participate flag.
        participate = true;
      }
      else {
        logger.debug("Opening single Hibernate Session in OpenSessionInViewFilter");
        Session session = getSession(sessionFactory);
        TransactionSynchronizationManager.bindResource(sessionFactory, new SessionHolder(session));
      }
    }
    else {
      // deferred close mode
      if (SessionFactoryUtils.isDeferredCloseActive(sessionFactory)) {
        // Do not modify deferred close: just set the participate flag.
        participate = true;
      }
      else {
        SessionFactoryUtils.initDeferredClose(sessionFactory);
      }
    }

    try {
      filterChain.doFilter(request, response);
    }

    finally {
      if (!participate) {
        if (isSingleSession()) {
          // single session mode
          SessionHolder sessionHolder =
              (SessionHolderTransactionSynchronizationManager.unbindResource(sessionFactory);
          logger.debug("Closing single Hibernate Session in OpenSessionInViewFilter");
          closeSession(sessionHolder.getSession(), sessionFactory);
        }
        else {
          // deferred close mode
          SessionFactoryUtils.processDeferredClose(sessionFactory);
        }
      }
    }
  }

  /**
   * Look up the SessionFactory that this filter should use,
   * taking the current HTTP request as argument.
   <p>The default implementation delegates to the {@link #lookupSessionFactory()}
   * variant without arguments.
   @param request the current request
   @return the SessionFactory to use
   */
  protected SessionFactory lookupSessionFactory(HttpServletRequest request) {
    return lookupSessionFactory();
  }

  /**
   * Look up the SessionFactory that this filter should use.
   <p>The default implementation looks for a bean with the specified name
   * in Spring's root application context.
   @return the SessionFactory to use
   @see #getSessionFactoryBeanName
   */
  protected SessionFactory lookupSessionFactory() {
    if (logger.isDebugEnabled()) {
      logger.debug("Using SessionFactory '" + getSessionFactoryBeanName() "' for OpenSessionInViewFilter");
    }
    WebApplicationContext wac = WebApplicationContextUtils.getRequiredWebApplicationContext(getServletContext());
    return wac.getBean(getSessionFactoryBeanName(), SessionFactory.class);
  }

  /**
   * Get a Session for the SessionFactory that this filter uses.
   * Note that this just applies in single session mode!
   <p>The default implementation delegates to the
   <code>SessionFactoryUtils.getSession</code> method and
   * sets the <code>Session</code>'s flush mode to "MANUAL".
   <p>Can be overridden in subclasses for creating a Session with a
   * custom entity interceptor or JDBC exception translator.
   @param sessionFactory the SessionFactory that this filter uses
   @return the Session to use
   @throws DataAccessResourceFailureException if the Session could not be created
   @see org.springframework.orm.hibernate3.SessionFactoryUtils#getSession(SessionFactory, boolean)
   @see org.hibernate.FlushMode#MANUAL
   */
  protected Session getSession(SessionFactory sessionFactorythrows DataAccessResourceFailureException {
    Session session = SessionFactoryUtils.getSession(sessionFactory, true);
    FlushMode flushMode = getFlushMode();
    if (flushMode != null) {
      session.setFlushMode(flushMode);
    }
    return session;
  }

  /**
   * Close the given Session.
   * Note that this just applies in single session mode!
   <p>Can be overridden in subclasses, e.g. for flushing the Session before
   * closing it. See class-level javadoc for a discussion of flush handling.
   * Note that you should also override getSession accordingly, to set
   * the flush mode to something else than NEVER.
   @param session the Session used for filtering
   @param sessionFactory the SessionFactory that this filter uses
   */
  protected void closeSession(Session session, SessionFactory sessionFactory) {
    SessionFactoryUtils.closeSession(session);
  }

}